Screen Strip 1:30 / 1l

To clean silk screens and screen printing frames after a print job:

1. Start by removing any ink residue.
2. In typical UK conditions, mix 1 part stencil remover concentrate with at least 20 parts of water. However, in warm, dry conditions, you can dilute it further, using 1 part concentrate with up to 30 parts of water.
3. Wet both sides of the screen with this solution and gently scrub using a soft-bristled nylon brush.
4. Allow the solution to sit for a maximum of 5 minutes, then rinse thoroughly with a strong stream of water.

Remember to wear eye protection and rubber gloves to protect your eyes and hands. Ensure the product is not exposed to temperatures below 8°C or above 35°C, as it is sensitive to frost.